(编辑：jimmy 日期: 2024/12/25 浏览：2)
项目中部分只读表易被人误改写，故决定在非线上环境里对这些表附加只读属性，方便在出现误改写的时候抛出lua错误，最终版代码如下：
--[[------------------------------------------------------------------------------
-** 设置table只读 出现改写会抛出lua error
-- 用法 local cfg_proxy = read_only(cfg) retur cfg_proxy
-- 增加了防重置设置read_only的机制
-- lua5.3支持 1）table库支持调用元方法，所以table.remove table.insert 也会抛出错误，
-- 2）不用定义__ipairs 5.3 ipairs迭代器支持访问元方法__index，pairs迭代器next不支持故需要元方法__pairs
-- 低版本lua此函数不能完全按照预期工作
*]]
function read_only(inputTable)
local travelled_tables = {}
local function __read_only(tbl)
if not travelled_tables[tbl] then
local tbl_mt = getmetatable(tbl)
if not tbl_mt then
tbl_mt = {}
setmetatable(tbl, tbl_mt)
end
local proxy = tbl_mt.__read_only_proxy
if not proxy then
proxy = {}
tbl_mt.__read_only_proxy = proxy
local proxy_mt = {
__index = tbl,
__newindex = function (t, k, v) error("error write to a read-only table with key = " .. tostring(k)) end,
__pairs = function (t) return pairs(tbl) end,
-- __ipairs = function (t) return ipairs(tbl) end, 5.3版本不需要此方法
__len = function (t) return #tbl end,
__read_only_proxy = proxy
}
setmetatable(proxy, proxy_mt)
end
travelled_tables[tbl] = proxy
for k, v in pairs(tbl) do
if type(v) == "table" then
tbl[k] = __read_only(v)
end
end
end
return travelled_tables[tbl]
end
return __read_only(inputTable)
end
测试代码如下：
local t0 = {k = 1}
local t2 = {
fdsf = {456}
}
local t1 = {
a = {456, 89},
b = {456,ddss = 9, t2 = t2},
d = 45,
e = "string",
}
t1.c=t1
local t3 = read_only(t1)
print(t3.d, t3.c.e, t3.c.c.b.t2.fdsf)
function q1() t3.d = 4555 end
function q2() t3.c.d = 90 end
function q3() t3.c.c.b.t2.fdsf =90 end
function q4() table.remove(t3.a) end
function q5() t3.b[ddss] = nil end
function q6() t3[f] = 89 end
function q7() table.insert(t3.a, 999) end
print(pcall(q1))
print(pcall(q2))
print(pcall(q3))
print(pcall(q4))
print(pcall(q5))
print(pcall(q6))
print(pcall(q7))
print(t3.a[1])
for k,v in pairs(t3) do
print("===pairs t3:",k,v)
end
for k,v in pairs(t3.a) do
print("===pairs t3.a:",k,v)
end
for k,v in ipairs(t3) do
print("===ipairs t3:",k,v)
end
for k,v in ipairs(t3.a) do
print("===ipair t3.a",k,v)
end
print("len t3:",#t3)
print("len t3.a:", #t3.a)
local t4 = read_only(t2)
local t5 = read_only(t0)
local t6 = read_only(t0)
print(t3.b.t2, read_only(t2))
print(t5, t6, t0)
测试环境https://www.lua.org/cgi-bin/demo lua5.3.4：
string table: 0x20d4ba0 false input:17: error write to a read-only table with key = d false input:17: error write to a read-only table with key = d false input:17: error write to a read-only table with key = fdsf false input:17: error write to a read-only table with key = 2 false input:17: error write to a read-only table with key = nil false input:17: error write to a read-only table with key = nil false input:17: error write to a read-only table with key = 3 ===pairs t3: e string ===pairs t3: b table: 0x20ccd60 ===pairs t3: a table: 0x20d4e70 ===pairs t3: d 45 ===pairs t3: c table: 0x20ca700 ===pairs t3.a: 1 456 ===pairs t3.a: 2 89 ===ipair t3.a 1 456 ===ipair t3.a 2 89 len t3: 0 len t3.a: 2 table: 0x20d4870 table: 0x20d4870 table: 0x20d5690 table: 0x20d5690 table: 0x20d1140
代码思路设计：
1.使用proxy={}空表而不是目标表tbl来设置__newindex是因为__newindex必须在原表里面不存在才会调用，这样就依然可以对已存在的字段进行改写
__newindex: The indexing assignment table[key] = value. Like the index event, this event happens when table is not a table or when key is not present in table. The metamethod is looked up in table. Like with indexing, the metamethod for this event can be either a function or a table. If it is a function, it is called with table, key, and value as arguments. If it is a table, Lua does an indexing assignment to this table with the same key and value. (This assignment is regular, not raw, and therefore can trigger another metamethod.) Whenever there is a __newindex metamethod, Lua does not perform the primitive assignment. (If necessary, the metamethod itself can call rawset to do the assignment.)
2.避免出现table的互相引用，加入travelled_tables存储已经设置过proxy的table的映射
3.对于原表tbl的访问使用__index=tbl
4.对于表查长度使用__len= function () return #tbl end
5.对于遍历pairs，查到lua5.3的pairs默认迭代器next不支持访问元表__index，故直接__pairs = function () return pairs(tbl) end，以此来生成对目标表的迭代遍历
6.对于ipairs，查到lua5.3 ipairs函数生成的迭代器默认就支持访问元表__index，故不需要添加__ipairs
8.2 – Changes in the Libraries
"color: #ff0000">总结
以上就是这篇文章的全部内容了，希望本文的内容对大家的学习或者工作能带来一定的帮助，如果有疑问大家可以留言交流，谢谢大家对的支持。